ТеплоизоляцияBacchi#Bacchi#Insulation#Thermal insulation panels and felts#Thermal insulation sheets and panels in mineral fibres#Natural insulating felts and panels for sustainable building
Bacchi
CUNEO B/SANA CALCIUM SILICATECUNEO B/SANA
Special calcium silicate panels, with variable thickness, for the correction of internal thermal bridges, to be used in combination with B/SANA panels.
The panels are also produced with a calcium hydrate base, hydrophobic or alternatively hydrophilic, to be used in combination with B/ISOLA panels respectively.
Fields of use:
- mitigation of internal thermal bridges (under-ceiling or perimeter wall interface with internal partitions);
- insulation of sloping window-hole balusters;
- finishing the edges of internal insulation made with B/SANA or B/ISOLA.
Properties:
- composed of calcium silicate reinforced with cellulose;
- high alkalinity preventing the development of mould;
- high permeability;
- prevents the formation of condensation water;
- low weight;
- non-combustible;
- monolithic structure.
Bacchi s.p.a. proposes a specific line of products for renovation and energy requalification interventions from the inside, which can improve the performance of the external envelope in an effective, quick and simple way but with great attention to health protection. The three main factors that create most environmental and health problems are moisture, mould and heat loss. Bacchi intervenes precisely on these factors with solutions that can be applied to the internal surface of pre-existing masonry, creating a sort of internal coat, with lime-based insulation, that reduces heat loss, without the use of vapour brakes, leaving the envelope breathable, dry and mould-free. Internal insulation offers innumerable advantages, as it can be applied in any season and weather condition, does not require scaffolding, greatly reduces heat loss, improves thermal inertia in summer and allows the desired room temperature to be reached quickly.
The system includes:
B/SANA, B/ISOLA: breathable mineral insulation panels. They are applied to internal wall surfaces in a very simple manner, reducing heat loss and solving mould problems, while at the same time leaving the walls free to breathe and providing a pleasant, healthy indoor microclimate.
The line is completed by adhesives and skim coatings (MYKOLL and BIOFINE) and the anti-mould product (MUFFY SPRAY).
0
0
