TSP - Устройство для теста на кручение

Non-destructive testing method for welded studs with trigger pin (CD) and short-cycle (SC) process.‎ The torsion test of welded studs is used to check the quality of welds.‎ Applications - Non-destructive testing method for weld studs welded with a trigger pin (CD) and short-cycle (SC) process.‎ The torsion test of welded studs is used to check the quality of welds Description - Delivery includes test kit: 1 torque spanner 5 pin adapters (M3 to M8) 1 4 mm hexagonal spanner 1 parameter table - The torsion device is used by applying the torsion dynamometer to the pin.‎ This exerts a defined stress in the welding zone.‎ The parameters for the torsion test can be found in the table included in the kit.‎ You can set the torque in the dynamometer by turning the setting wheel ((0-10Nm).‎ Each parameter in the table belongs to a specific pin diameter, material and sheet thickness.‎ These empirical parameters refer to the limit between plastic and elastic deformation of the pin or sheet metal.‎ If the ratio of pin diameter to workpiece thickness is 1:2, the result is plastic deformation of the sheet metal; for ratios greater than 1:2, the pin bends and breaks.‎ - With this tool, a fast, easy and non-destructive pin test can be carried out.‎ A quantitative weld quality check can be made in line with ISO 9000ff.‎