Lamborghini CaloreClima IDOLA ST 3.2 - Тепловой насос

New range of split-type Full Inverter heat pumps with environmentally friendly R32 refrigerant gas.‎ The range includes an Outdoor Unit housing the core of the refrigeration circuit—from the compressor to the fan with the air-side heat exchanger—connected via refrigerant piping to the Indoor Unit.‎ The Indoor Unit contains the hydraulic core of the generator with all main components pre-installed, such as the high-efficiency circulator and the expansion vessel, allowing for safe, practical, and fast installation.‎ The Indoor Unit is also equipped with an electric backup heater, rated at 3 kW for single-phase models and 6 kW for three-phase models.‎ The IDOLA ST 3.‎2 units differ from the IDOLA S 3.‎2 models by including a domestic hot water (DHW) storage tank built directly into the Indoor Unit.‎ Models from size 4 to 10 are equipped with a 190 L tank, while sizes 12 to 16T come with a 240 L tank.‎ This tank can be supplemented with an electric heater (optional accessory) or connected to a solar thermal system (not supplied).‎ The split installation also brings the undeniable advantage of eliminating any risk of freezing, even in extremely cold temperatures (down to -25°C) and during power outages—unlike electric antifreeze heaters used in external monobloc units.‎ All units meet the most demanding winter and summer climate control requirements for small and medium-capacity systems.‎ They can produce hot water up to 65°C, making them suitable for virtually any heating system, whether underfloor, fan coil, or radiator-based.‎ Lamborghini CaloreClima’s new Full Inverter concept applies DC inverter modulation to the three main energy-consuming components—compressor, fan, and pump.‎ This allows precise modulation of power output to closely match thermal demand, offering exceptionally high efficiency and significant energy savings for the user.‎ In addition, the Full Inverter concept minimizes inrush currents, avoiding electrical surges and ensuring a longer lifespan for the components.‎ With some of the lowest noise levels on the market, the system can operate as the sole heat generator or be integrated with other sources, such as a boiler (see our Factory-Made Hybrid solutions for more information).‎ Optional warranty extension up to 5 years.‎ THE CONTROL SYSTEM The multilingual user interface features Capsense technology and a 2.‎8” graphic display, enabling the user to interact with the product in a smooth and intuitive way.‎ The onboard interface communicates seamlessly with the new intelligent Connect CRP systems, capable of managing up to 8 thermostats (7 Connect Evo Zones + 1 Connect CRP with full chronothermostat functions), divided into 2 zones—one direct and one mixed.‎ MODBUS PROTOCOL For smart management via an external BMS system.‎ HEATING AND COOLING with the heat pump as the only generator Full Inverter modulation maintains the desired setpoints in both heating and cooling, optimizing energy consumption for the user.‎ The built-in climate curve settings improve comfort and further reduce consumption.‎ DOMESTIC HOT WATER (DHW) PRODUCTION When the DHW temperature sensor falls below a certain threshold, the system switches to DHW mode, activating heating with a dedicated setpoint and redirecting energy to the integrated DHW tank.‎ ADDITIONAL ENERGY SOURCES (boiler or electric heater) The heat pump can activate these additional sources either as integration or replacement, based on user-defined parameters.‎ These sources can also be triggered in emergency mode if the heat pump is not functioning properly.‎ SMART GRID INPUT FROM PHOTOVOLTAIC SYSTEM AND POWER GRID The unit is equipped with two digital inputs for signals from a photovoltaic system and the power grid.‎ These Smart Grid contacts help optimize energy consumption and reduce energy bills.‎ The first contact (EVU) signals when the photovoltaic system is generating power, prompting the heat pump to raise the DHW setpoint to maximize self-consumption (where the user benefits most).‎ The grid input (SG) notifies the heat pump when energy costs are higher (if supported by the utility provider), allowing the unit to limit operation according to user-defined settings.‎ For detailed configuration, please refer to the user manuals.‎ REMOTE CONTROL VIA APP Available for iOS and Android with the optional Connect CRP.‎ DHW TANK ELECTRIC HEATER In DHW mode, the unit manages an electric heater in the tank for integration, anti-legionella protection, or as a backup energy source in the event of a fault.‎ FAST DHW This function prioritizes DHW production by activating all available energy sources to bring the tank to setpoint temperature as quickly as possible.‎ ANTI-LEGIONELLA FUNCTION Allows weekly anti-legionella cycles to be programmed.‎ Proper operation requires either an integrated boiler or an electric heater in the DHW tank.‎ SILENT MODE When activated, this mode reduces the compressor’s maximum frequency and fan speed to significantly lower noise emissions.‎ Two levels are available and can be scheduled in daily time slots (e.‎g.‎ nighttime).‎ ON/OFF VIA EXTERNAL CONTACT The unit can be turned on and off through an external contact (e.‎g.‎ zone thermostat).‎ In this case, the operating mode follows the controller’s settings.‎ HEATING/COOLING SWITCHING VIA EXTERNAL CONTACTS The unit can receive a summer/winter mode signal from an external source (e.‎g.‎ a zone thermostat).‎ ECO MODE Dedicated setpoint for Eco operation, also programmable by time slots.‎ WEEKLY SCHEDULING The optional Connect CRP allows differentiated scheduling for each day of the week, defining for each time slot the desired mode (COOLING/HEATING/DHW) and setpoint.‎ ANTIFREEZE PROTECTION Achieved through heating operation of the heat pump with circulator ON and, if present, the electric booster.‎ Further info from manufacturer on IDOLA ST 3.2 Lamborghini CaloreClima