Lamborghini CaloreClima TORO W

High power condensing modules for cascade installationHigh power condensing thermal module, designed for single installations or in sequence up to 600 kW.‎ Hydraulic, gas and flue gas accessories for cascade installation, with 2, 3 and 4 modules.‎ Pre-assembled heat exchanger with elements in aluminum-silicon alloy engineered for the maximum efficiency and minimum pressure drops on the water circuit.‎ Total pre-mixing unit, for a micro-flame combustion with very low polluting emissions (Class 6 according to EN 15502-1).‎ The metal micro-fiber burner can run on Natural gas or LPG Generator protection systems: Double sensor (delivery and return) system to operate at constant ΔT.‎ Exchanger overtemperature protection sensor calibrated to 95°C.‎ Flue gas safety sensor Water pressure switch with minimum limit of 0,8 bar Hydraulic unit (supplied as accessory) with three-way valve for discharge into the atmosphere and a no-return valve.‎ It’s possible choosing between two circulators, standard and high head Sealed room air/flue gas circuit and check valve on the flue gas ejection duct to design the pressurised manifold Master / Slave cascade management with self-configuration system and possibility of setting the on/off sequence of the single generator.‎ The electronic control on board is design to manage a double system zone and one DHW storage.‎ In combination with the regulator FZ4 B the boiler can manage different temperature zone (direct and mixed) Range Rated certified generator to adjust the generated power to the system’s needs by increasing the efficiency of the system and preserving the mechanics of the machine.‎ The modules can be controlled and conducted remotely: Power or temperature adjustment with 0 - 10V signal Blocking alarm signal for safety and to restart operation Opentherm (OT) and Modbus communication protocols with settable parameters.‎ Further info from manufacturer on TORO W Lamborghini CaloreClima