Lamborghini CaloreClima IDOLA SW-T 3.2 - Тепловой насос

Full Inverter split-type heat pumps with low environmental impact R32 refrigerant gas.‎ The split installation offers the advantage of eliminating any risk of freezing in the outdoor unit, even in the most severe weather conditions (down to -25°C) and during power outages.‎ IDOLA SW-T 3.‎2 is a heat pump designed for heating and domestic hot water (DHW) production, developed specifically for use in small to medium-sized residential units.‎ Each component is designed with the renovation of existing heating systems in mind, as well as for replacing traditional boilers and electric water heaters, ensuring the same level of comfort with an energy-efficient and environmentally friendly solution.‎ All units meet the most demanding requirements for winter climate control and can produce hot water up to 65°C, making them suitable for nearly all types of heating systems.‎ The system consists of an outdoor unit housing the core of the refrigeration circuit—from the compressor to the fan and air-side heat exchanger—connected via refrigerant lines to the indoor unit, which contains the core of the hydraulic circuit (including all essential components) and a 100-liter DHW storage tank.‎ The indoor unit is also equipped with two electric backup heaters: 3 kW for the heating system and 1.‎2 kW for DHW production.‎ Lamborghini CaloreClima’s new Full Inverter concept applies DC inverter modulation to the three main energy-consuming components—compressor, fan, and pump.‎ This enables precise power modulation to match the thermal load, ensuring extremely high efficiency and significant energy savings.‎ The Full Inverter concept also reduces inrush currents, prevents grid disturbances, and extends the lifespan of components.‎ Thanks to the quality of its components and manufacturing processes, the system offers one of the lowest sound levels currently available on the market.‎ Optional warranty extension: “Worry-Free” 5 years THE CONTROL SYSTEM The user interface features Capsense technology and a 2.‎8” graphic display, enabling easy and intuitive interaction.‎ The onboard interface communicates with the Connect CRP systems, which can manage up to 8 thermostats (7 Connect CRP Zones + 1 Connect CRP) across two zones: one direct and one mixed.‎ MODBUS PROTOCOL For smart integration with external BMS systems.‎ HEATING AND COOLING with the heat pump as the sole generator Full Inverter modulation allows for maintaining desired setpoints while optimizing energy consumption.‎ Built-in climate curve settings (standard) further enhance comfort and efficiency.‎ DOMESTIC HOT WATER (DHW) PRODUCTION Activated when the DHW temperature sensor drops below the setpoint threshold.‎ ADDITIONAL ENERGY SOURCES (electric heaters) The heat pump can activate these sources either as integration or replacement, based on customizable parameters.‎ They may also be triggered in emergency situations if the heat pump malfunctions.‎ SMART GRID INPUT FROM PHOTOVOLTAIC AND GRID The unit is equipped with two digital inputs (Smart Grid contacts) to manage signals from photovoltaic systems and the electrical grid, optimizing energy usage and lowering costs.‎ REMOTE CONTROL VIA APP Available for iOS and Android when combined with the optional Connect CRP module.‎ DHW TANK ELECTRIC HEATER In DHW mode, the unit manages an electric heater in the tank as integration, for anti-legionella cycles, or as a backup energy source in case of system fault.‎ FAST DHW This function prioritizes DHW production by activating all available energy sources to bring the tank to the setpoint as quickly as possible.‎ ANTI-LEGIONELLA FUNCTION Allows weekly anti-legionella disinfection cycles to be scheduled.‎ SILENT MODE Reduces compressor frequency and fan speed to minimize noise levels.‎ Two different levels available, programmable within daily time slots (e.‎g.‎ nighttime).‎ ON/OFF VIA EXTERNAL CONTACT The unit can be switched on and off through an external contact (e.‎g.‎ from a zone thermostat).‎ In this case, the unit will operate according to the controller's preset mode.‎ HEATING/COOLING SWITCHING VIA EXTERNAL CONTACTS The unit can receive a summer/winter mode signal from an external source (e.‎g.‎ zone thermostat).‎ ECO MODE Dedicated Eco setpoint for energy-saving operation, which can also be scheduled by time slots.‎ WEEKLY SCHEDULING The optional Connect CRP allows hourly programming for each day of the week, defining mode (COOLING/HEATING/DHW) and setpoint for each time slot.‎ ANTIFREEZE PROTECTION Achieved through heating operation with the circulator ON and, if installed, the electric booster.‎ Further info from manufacturer on IDOLA SW-T 3.2 Lamborghini CaloreClima