ELLISSE - Регулируемые и фиксированные алюминиевые солнцезащитные системы с эллиптическими ламелями

ELLISSE is an aluminium brise soleil system with ellipsoidal blades from 150 to 600 mm.‎ Motorised adjustable or fixed pre-oriented version.‎ It reduces air conditioning consumption by up to 30%.‎ With the ELLISSE system, façade solar shading becomes an active architectural element, capable of regulating light intake and thermal gain according to exposure, season and time of day.‎ The ellipsoidal section blades, available in six sizes from 150 to 600 mm wide, are made of extruded aluminium and integrate into the façade design with a line that is both soft and technical at the same time, avoiding the rigid effect of rectangular profiles.‎ The system is available in two configurations: ELLISSE MOVE, with continuously adjustable blades with manual or motorised operation, and ELLISSE FIX, with blades pre-oriented on five inclinations.‎ The application is possible on walls, on cantilevered shelves, in niches or on sliding frames, horizontally or vertically, on new buildings and retrofitting.‎ Technical characteristics Blade sectionand material: ellipsoidal extruded aluminium, structural extrusion alloy Available blade sizes: 150 / 200 / 300 / 400 / 500 / 600 mm wide Maximum individual blade length: [TO BE FULL - specify maximum length for each blade size, without intermediate supports] Support frames: extruded aluminium, 60x60 / 80x80 / 100x60 and 100x100 mm sections for fixed solution; 70x 50 and 80x 40 mm for openable solution; side joint brackets in die-cast aluminium with "button" system Rotation system (ELLISSE MOVE): pins and control rods in A2 stainless steel; continuously adjustable blades Blade caps: high-strength Nylon PA66, in colours co-ordinated with the RAL of the blade Pre-oriented inclinations (ELLISSE FIX with 200 mm and 300 mm blade): 0° / 15° / 30° / 45° / 90° ELLISSE MOVE manoeuvre: manual with friction system and articulated fork, or motorised with linear motor (24V or 220V) Optional automation: electronic device for automatic management of orientation according to the desired light intensity; can be integrated with home automation systems compatible with rain sensor, wind sensor and temperature sensor; ready for KNX home automation integration and management via smartphone/tablet app Method of application: wall-mounted, on cantilevered shelf, on windowsill, in niche, on sliding frame; horizontal or vertical Finishes: : standard RAL range in glossy, matt or wrinkled finish - Pure White 9010, Pearl White 1013, Traffic White 9016, Moss Green 6005, Pale Green 6021, Light Grey 7035, Anthracite Grey 7016, Dust Grey 7037, Chocolate Brown 8017, Greyish Brown 8019, Brilliant Aluminium 9006, Greyish Aluminium 9007, Intense Black 9005, Rusty Wrinkled Corten, Painted Bronzecompatible with rain sensor, wind sensor and temperature sensor; ready for KNX home automation integration and management via smartphone/tablet app Configurations ELLISSE MOVE - adjustable sunshade with continuously adjustable blades, manual or motorised; ideal for exposures where irradiation varies throughout the day and season ELLISSE FIX - sunshades with fixed blades pre-oriented on 5 inclinations (0° / 15° / 30° / 45° / 90°); essential technical solution for constant exposures, with reduced costs and maintenance Energy performance and environmental comfort The ELLISSE system acts as an active solar shading placed in front of the glazed envelope, intercepting thermal radiation before it reaches the surface of the window frame.‎ This principle - the basis of sunshade façades in contemporary architecture - guarantees measurable results in terms of both energy and indoor comfort.‎ Retention of solar radiant heat: up to 80% of the radiation intercepted outside the glazed surface, significantly reducing the thermal load on the envelope Reduction in summer air-conditioning consumption: up to 30% on the costs of cooling systems, thanks to less overheating of indoor spaces during hours of maximum radiation Protection from heat loss at night: in a closed configuration, the oriented blades create an air gap that reduces heat loss to the outside in cold seasons Luminous comfort and regulation of natural light: the continuously variable orientation of the blades (ELLISSE MOVE) makes it possible to manage the internal light intensity, avoiding glare and reflections on the worktops, while maintaining the natural lighting of the rooms Air recirculation and façade ventilation: the application on cantilever brackets creates a ventilated cavity between the sunshade and the window frame, favouring the disposal of accumulated heat and improving façade performance Reduction of external noise: the ellipsoidal blade structure acts as an additional acoustic barrier against external noise, contributing to indoor comfort Value in energy requalification interventions: external shading is recognised as one of the interventions contributing to the improvement of the building's energy class and can be integrated into envelope efficiency projects Integration with home automation: automatic orientation of the blades according to radiation and time of day (optional system) optimises the seasonal energy balance and frees the user from manual management Applications Residential: villas, private homes, apartment blocks and renovations with energy-efficient façade upgrades Tertiary architecture: offices, office buildings and commercial buildings with large glazed areas Public and hospitality facilities: schools, hospitals, hotel complexes, sports and cultural centres Industrial: solar protection of workstations and production environments with large-surface glazing